Water cannon down streaming

Ron Musgraves

Exterior Restoration Specialist
Staff member
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/oPgbgMN7GVs&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/oPgbgMN7GVs&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

Its used to wash verticle surfaces.
 
Ron

Where are those available and how many gallons a minute should you be pushing to get those results.
 
sorry guys don't mean to repeat myself I'm still a little hungover from all the green beer. but where can I buy one of these
 
Why use that, as opposed to a hose barb inside a quick disconnect?
 
Show me what your talking about.

Here you go...
S7300027.JPG


I crushed the end a little bit, to provide better coverage inside ducts. This tip can easily throw chem to the end of a 20' duct.
 
Here you go...
S7300027.JPG


I crushed the end a little bit, to provide better coverage inside ducts. This tip can easily throw chem to the end of a 20' duct.

that will work for sure, the water cannon i can adjust the spray just by turning the end. if i want a fan i can get it.

That a definite lower cost way, great tip. or should i say hose barb?
 
Here you go...
S7300027.JPG


I crushed the end a little bit, to provide better coverage inside ducts. This tip can easily throw chem to the end of a 20' duct.

We will have a little competition and see if this product can shoot farther and what the volume is?
 
We will have a little competition and see if this product can shoot farther and what the volume is?

Distance is optimized by the GPM/inside diameter ratio of the machine and hose barb. I use a 4GPM machine and a 1/4"ID hose barb.
 
I tried my hose barb tip today on a chimney that was built in the middle of the house and you couldn't get to it and it worked like a charm.I downstream witha 4gpm machine it it would reach 30 ft easy and was eally putting the chem out there.

I don't remember who told me about it on here but thanks a bunch.

Total cost:$2.25 for the hose barb and $3.00 for the quick connect.
 
Back
Top