Power Wash Store- Specials Updated Daily -Parts-Equipment Pressure washers

Paul Kassander

New member
Daily Deals!
1/10/11
General Pump YRL51 Hydraulic Compensating Gun


RL51.jpg



Part # 3004 $49.85

This product still qualifies for our FREE SHIPPING!

Hydraulic action easy squeeze trigger gun offers an extremely comfortable grip. 13.2 gpm, 4,100psi, 320 degrees F, 3/8" fpt inlet, 1/4" fpt outlet. PDF Breakdown

Trigger Gun - Guns are fairly simple mechanisms designed around a trigger-operated ball valve. The valve ball is held in a closed or forward position by flow of water and blocks flow of water through gun to the nozzle. When trigger is depressed it pushes a pin against ball, forcing the ball off its seat and opening a path for water to flow to the nozzle. When trigger is released gain a spring returns the ball to its seating and flow is again blocked. Gun should be comfortable for operator to use based on the performance
Generally front entry type guns are used on lower pressure units and are less expensive.
Rear entry guns are more comfortable as they have less kick-back and the hose does not get in the operators way.
The gun is probably the most abused component of the pressure washer and thereby the most frequently replaced. It pays to offer a quality one thereby avoiding expensive warranty cost.
 
Last edited by a moderator:
1/11/11
Hansen 3/8" Quick Connects


Hansen quick connect plated steel plug and Brass Couplers, 3/8" FPT/MPT Inlet with 3/8" Plug/Coupler Outlet. These quick connects offer superior machining and material quality for long life and durability. Hansen couplers are for the contractor who desires long life and quality form their tools.

 
1/13/11
McCauley Spray Lance


mccauley_flex_lance.jpg

48" Lance with Molded Grip, 1/4" MPT Inlet & Outlet, 10 GPM, 4,000 PSI.

Lances/Flexible
Flexible lances allow the operator to bend the lance in multiple directions and steep angles while keeping the gun in a single position. This lance is a good choice for those in car wash operations or for those who degrease engines and other equipment. One style of flex lance is equipped with two solid pipes on each end with a flexible rubber grip in the center. Under this grip is a short section of flexible hose that is connected to each side of the pipe. The end of the lance can be bent in any direction and moved easily while the water is spraying. A second style is the McCauley spray lance. It uses a section of hose encased in a flexible metal housing. This unique housing allows the operator to bend the lance to a particular angle and have it maintain its shape under pressure. This feature enables the operator to attach the lance to the end of a pipe for spraying at strange angles. This is especially useful for hood cleaners who often have to spray ducts that turn in many directions. It can also be used for cleaning gutters.
 
1/14/11
Trombone Nozzle Holder


8330_trombone_nozzle_holder.jpg

Rated to 11 GPM @ 4,000 PSI
High Pressure Nozzle goes in the top. Low Pressure Nozzle goes in the bottom.
When you what low pressure soap simply release the trigger & reach up and pull back on the piston. To return to high pressure return the piston to the forward position.

 
General Pump Model EZ4040G

1/17/11
General Pump - Model EZ4040G


EZ4040G_PUMP.jpg

General Pump- EZ4040G $299.95
Includes Free Shipping

This is a new General Pump replacement pump. Rated at 4 GPM up to 4000 psi.
• Standard SAE J609 gasoline mounting flange for up to 13 hp engines
• Forged brass manifold with an exclusive lifetime warranty and 3:1 hydrostatic rating
• Die-cast, anodized aluminum oil-bath crankcase
• Innovative one-piece plunger design to eliminate water entering crankcase
• Premium roller bearing
• 5% reduction in crankcase load compared to standard 3,000 PSI, 15 mm pumps
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions
Click on the link to get a PDF version of the pump specifications. EZ4040G

 
Cat Pump Model 56 - free shipping

1/18/11
Cat Pump - Model 56


Cat_Pump_model_56.jpg

Cat Pump- 56 $1078.70
Includes Free Shipping
5.5 gpm up to 3500 psi @ 1210 rpm. This is a new cat replacement pump. Click on the link to get a PDF version of the pump specifications. CAT56

[FONT=Myriad Pro,Myriad Pro][FONT=Myriad Pro,Myriad Pro][FONT=Myriad Pro,Myriad Pro][FONT=Myriad Pro,Myriad Pro][FONT=Myriad Pro,Myriad Pro][FONT=Myriad Pro,Myriad Pro]FEATURES[/FONT]
[FONT=Myriad Pro,Myriad Pro]1- Triplex design delivers high efficiency and low pulsation.[/FONT]
[FONT=Myriad Pro,Myriad Pro]1- Durable dual V-Packings are lubricated and cooled by pumped liquid.[/FONT]
[FONT=Myriad Pro,Myriad Pro]1-Pre-Set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment.[/FONT]
[FONT=Myriad Pro,Myriad Pro]1- Special high density, polished, concentric plungers provide a true wear surface and extended seal life.[/FONT]
[FONT=Myriad Pro,Myriad Pro]1-Optional HT, FPM elastomers for compatibility with many liquids and temperatures up to 200°F.[/FONT]
[FONT=Myriad Pro,Myriad Pro]COMMON SPECIFICATIONS[/FONT]
[FONT=Myriad Pro,Myriad Pro]Bore................................................................................0.708" (18 mm)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Inlet Pressure Range...........................Flooded to 60 psi (Flooded to 4 bar)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Crankcase Capacity....................................................25 oz. (0.75 l)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Standard Liquid Temperature................................160°F (71°C)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.[/FONT]
[FONT=Myriad Pro,Myriad Pro]Inlet Ports (2)........................................................1/2" NPTF (1/2" NPTF)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Discharge Ports (2).............................................3/8" NPTF (3/8" NPTF)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Shaft Diameter...........................................................0.945" (24 mm)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Weight.....................................................................29.25 lbs. (13.3 kg)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Weight w/Gearbox.................................................36.8 lbs. (16.7 kg)[/FONT]
[FONT=Myriad Pro,Myriad Pro]Dimensions...........................................13.93 x 8.2 x 6.41" (354 x 208 x 163 mm)*See Gearbox Data Sheet 8051-8078 for maximum engine rpm.[/FONT]
[/FONT]
[/FONT]
[/FONT]
[/FONT]
[/FONT]
 
General Pump Model TS2021 - free shipping

1/19/11
General Pump Model TS2021


ts2021n.jpg

General Pump TS2021 $439.95
Includes Free Shipping
5.6 gpm rated up to 3500 psi
• The preferred pump frame in the pressure cleaning industry
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
Click on the link to get a PDF version of the pump specifications. TS2021
 
General Pump Packing Extractor Kit - Free Shipping

1/20/11
General Pump Packing ExtractorKit
9040_Extractor_kit.jpg

Packing Extractor Kit # 9040 $52.05
Includes Free Shipping
Complete General Pump extraction kit including slide, slide hammer, pin, and bushings for 13 mm,15mm, 18mm, 20mm, 22mm, and 24mm pumps.

Learn how to install and service your general pump with the General Pump Installation and Service Manual PDF
 
General Pump K7 Unloader - Free Shipping

1/21/11
General Pump K7 Flow Actuated Unloader
ZK7-UNLOADER.jpg

K7 Unloader $69.95
Includes Free Shipping

• Features all stainless and brass internal parts
• New design reduces sensitivity to entrapped air
• No external moving parts or springs
• Eliminates high pressure in all lines while unit is in bypass mode
• Bypass restrictor eliminates pressure peaks during bypass
• Unique balanced piston design permits precise pressure adjustments
• Simple design for easy maintenance and service


K7 Flow Actuated Unloader, 3,500 PSI, 165 Degree F, 3/8" FPT Inlet, 3/8" MPT Outlet, 3/8" FPT Bypass
PDF Breakdown

 
General Pump Packing Insertion Kit

1/24/11
General Pump Insertion Kit
9041_Insertion_kit.jpg

GP Insertion Kit # 9041 $16.87
Qualifies for Free Shipping
For ease in installing packings on any General pump. Allows you to slide packings in with ease to avoid damage.
Learn how to install and service your general pump with the General Pump Installation and Service Manual PDF
 
geat job Paul

put the hudson float valve on that is a great price
 
PA Pressure Compensating Unloader - VB10

1/25/11
PA Pressure Compensating Unloader - VB10
YU3678-VB10_-UNLOADER.jpg

PA - VB10 Unloader # 1011 $71.95

Includes Free Shipping

PA Model VB10 soft touch unloader, feels like a flow actuated unloader but adjusts like a pressure actuated unloader. Pressure compensating, 3,500 psi, 8 gpm, 195 degrees F, 3/8" inlet, outlet, and bypass.
PDF Breakdown
 
Back
Top