jlpressure
JL Pressure Washing
What size trailer axles should I get. I am looking to make a 4 man trailer Maybe/Probably and take equipment from other trailers and maybe buy another new unit. , it will have a lot on it 2, 5.5's and 2 8's 4 reels for pressure line and 2 reels for feed these will either be stacked OR build frame above and have all or most reels hanging and also use as ladder rack, 375 or 500 gallon tank will not be traveling with water. Will have at least a 100 gallon SH tank tool boxes, gas cans etc etc etc. All my trailers now are getting old and have smaller axles, I think around 3500lbs
I will be putting a ton of stuff on this trailer it will be a 14 or 16 footer nothing bigger due to warehouse and fitting it in with other trailers. Should I be looking at a 5000-5500lbs axle OR MORE 6000-7000lbs
I also want to find a trailer constructed right strong. I look at all my trailers now and my welder says they all are medium quality/strength at best
What size axles? My trailers hve been through a lot and pretty beat its time to start rebuilding etc etc
The first picture I have added a 3rd machine right on the floor in front of the hot unit. 3 man trailers are kind of awkward either need a 2 man or 4 man cause my guys work in crews of 2
The enclosed trailer is pretty beat I redo the floor ever two years because we carry 3 55 gallon drums of SH when we go on the road. No matter what we put on the floors and walls the spilt SH eats it up. Have double coated it with Line X and installed drains, epoxy paints etc etc when your busy chit spills and have had to build up frame because SH eats the frame too. Trailers been with us maybe 7 years I think. it has 2 machines
All the springs on the two open trailers are bottomed out pretty much and its just time to rework everything
I will be putting a ton of stuff on this trailer it will be a 14 or 16 footer nothing bigger due to warehouse and fitting it in with other trailers. Should I be looking at a 5000-5500lbs axle OR MORE 6000-7000lbs
I also want to find a trailer constructed right strong. I look at all my trailers now and my welder says they all are medium quality/strength at best
What size axles? My trailers hve been through a lot and pretty beat its time to start rebuilding etc etc
The first picture I have added a 3rd machine right on the floor in front of the hot unit. 3 man trailers are kind of awkward either need a 2 man or 4 man cause my guys work in crews of 2
The enclosed trailer is pretty beat I redo the floor ever two years because we carry 3 55 gallon drums of SH when we go on the road. No matter what we put on the floors and walls the spilt SH eats it up. Have double coated it with Line X and installed drains, epoxy paints etc etc when your busy chit spills and have had to build up frame because SH eats the frame too. Trailers been with us maybe 7 years I think. it has 2 machines
All the springs on the two open trailers are bottomed out pretty much and its just time to rework everything