How do I clean this

I have never cleaned any brick. So what are the best cleaners for it?

mdtino said:

I have never cleaned any brick. So what are the best cleaners for it?

Click to expand...

The Pros Here will Tell you, I know the Answer but I'll let the Experts Tell you.

Doug Rucker will tell you.

will this help
http://www.propowerwash.com/board/u...h-old-brick-cleaning&highlight=brick+cleaning

I am not an expert brick cleaner by any means but when I have brick cleanings I turn to EacoChem products.

Here is their restoration line:

http://www.eacochem.com/ProductList/productListRestoration.htm

OK, basicly what I'm seeing is just an old brick building with mold issues. First thing I would try would be a a strong house wash mix with a good amount of soap. Keep the SH in your tank pretty much straight ( very little to no water ). Down stream all the brick and trim work. You may have to do 2-3 applications and let it dwell on there. Don't rush it. Let the mix do its job before you try to start rinsing. I can just about guarantee you that will work, but, if for some reason it needs more of a kick you may have to use a dedicated pump ( 12 volt or air pump ) to apply to mix at a stronger ratio. Once you see the mold dissapear just follow up with a Lt rinse. Another approach would be to apply the chems with an X Jet which will give you a higher ratio of mix application. Not really sure what your working with as far as equipment but these to me are your best options and how I would approach it. Also, using a shooter tip ( 0030-0040 etc...) will keep you off a ladder and or lift. You can shoot that whole building from the ground with no problem. Hope this helps.

+1 what Larry said. If the mildew is real heavy might just start 1st with xjet to get strong mix.

Its mold.

Ed Thompson said:

Its mold.

Click to expand...

Lets Here how you would do it

If it were me I'd call Ron, cause he knows the answer.