Adjustable Downstream Injectors

Vince Wood

Vince Wood

Active member
Can anyone recommend one that won't freeze up and stop working after only a few uses? I've been running EBC through them and they don't seem to hold up. Maybe I'm not flushing them with clean water long enough after each use?
 
Vince, I am curious to why you are using an adjustable instead of a fixed injector? I have never used an adjustable one as I always want max downstream available from my mix. Russ, should one get the #2 or #3 size with a 5.6 gpm unit? Thanks!
 
Vince Wood said:
Can anyone recommend one that won't freeze up and stop working after only a few uses? I've been running EBC through them and they don't seem to hold up. Maybe I'm not flushing them with clean water long enough after each use?
Click to expand...

flush them out real good Vince with water. EBC has charteristics to the formula that when left to dry they can build up a residue that over time can be a problem. Even with those using EBC and the xjet. I take the xjet nozzle and open the fan tips up and place it right at my dump valve and flush for a minute to so.
 
HighTide said:
Vince, I am curious to why you are using an adjustable instead of a fixed injector? I have never used an adjustable one as I always want max downstream available from my mix. Russ, should one get the #2 or #3 size with a 5.6 gpm unit? Thanks!
Click to expand...

This way I can adjust the mix right from the injector with just a turn of a knob instead using EBC and don't have to mess around with the 5 gallon bucket or measuring cup.
 
Newlook said:
flush them out real good Vince with water. EBC has charteristics to the formula that when left to dry they can build up a residue that over time can be a problem. Even with those using EBC and the xjet. I take the xjet nozzle and open the fan tips up and place it right at my dump valve and flush for a minute to so.
Click to expand...

I didn't know that. Will start doing it. Thanks Carlos.
 
You must log in or register to reply here.
Back
Top