crownholderpw
New member
As I am new to "softwashing" I am not new to pressure washing. With my current setup (which is small btw) I have a NorthStar 3500psi 4.5gpm machine, a power horse 3500psi (my partners machine), and a 26 gallon chem tank with a 5.5gpm 60psi motor. My questions as I will be doing softwashing now are as folllows:
1. What low pressure nozzles would you recommend? Also, should I be using a special gun.connection for these nozzles? Should I attach them straight to the chem tank with a sprayer hose or should I run them through my pressure washer siphoning out of the tank?
2. Can you run 2 motors out of the chem tank to increase GPM and increase how far it will shoot....(if i didnt use the pressure washer, and just used the motor/motors and hose that came with the unit itself)
3. What chemicals are recommended for softwashing heavily soiled surfaces, as most houses down here are pretty bad.
PS. If anyone has a link of where I can purchase these nozzles/gun that would be awesome!
Thanks in advance for your help!
1. What low pressure nozzles would you recommend? Also, should I be using a special gun.connection for these nozzles? Should I attach them straight to the chem tank with a sprayer hose or should I run them through my pressure washer siphoning out of the tank?
2. Can you run 2 motors out of the chem tank to increase GPM and increase how far it will shoot....(if i didnt use the pressure washer, and just used the motor/motors and hose that came with the unit itself)
3. What chemicals are recommended for softwashing heavily soiled surfaces, as most houses down here are pretty bad.
PS. If anyone has a link of where I can purchase these nozzles/gun that would be awesome!
Thanks in advance for your help!
Last edited:
