Surface cleaner ?

Ralph Q said:
That happens to me 7-8 time a day! What GPM are you running Randy? The guy at whisper wash recommends cutting some bristles off of the skirt for 10 gpm machines to let the water out faster or the bar bogs down because it is water logged.
Click to expand...
Thanks You sir. Running 10GPM. I went with the whisper wash as it is highly recommended and I posted a thread a while back now on modification to the whisper wash for bogging down. Funny how the hammer head has those cuts in the brushes. I was under the impression it was other equipment concerns. Be cutting more than turkey on Thursday to get ready for Friday. Thanks again Ralph, have a good Turkey day and the same to all others!
 
I would think it would be hard to hold that from flying in the air with 10gpm in the classic. Sure can move it fast and do a good job.
 
Christopher said:
I would think it would be hard to hold that from flying in the air with 10gpm in the classic. Sure can move it fast and do a good job.
Click to expand...
I have 2P/W hooked together. A 5 GPM that is under driven and a 4 GPM. I loose pressure due to the under drive but the volume with the right chems make all the difference. now have 3 surface cleaners, 1 for 10GPM at around 2200 psi and another for 4 at 4000 I use for the pressure and heat. The 3rd I found on the side of the road and with new handles and a new trigger it is a back up. That job was a 150 foot pull adding to a bit more pressure loss as you know. I have thght about going to a larger S/C but not sure if my pressure would spin one. I was also trying a new video camera on this job and for 50.00$ plus a memory card it worked well. Hooks to the handles on the S/C. With chems and rinse it was a 13min driveway....
 
Solopressure washer said:
I have 2P/W hooked together. A 5 GPM that is under driven and a 4 GPM. I loose pressure due to the under drive but the volume with the right chems make all the difference. now have 3 surface cleaners, 1 for 10GPM at around 2200 psi and another for 4 at 4000 I use for the pressure and heat. The 3rd I found on the side of the road and with new handles and a new trigger it is a back up. That job was a 150 foot pull adding to a bit more pressure loss as you know. I have thght about going to a larger S/C but not sure if my pressure would spin one. I was also trying a new video camera on this job and for 50.00$ plus a memory card it worked well. Hooks to the handles on the S/C. With chems and rinse it was a 13min driveway....
Click to expand...

Can you post pictures of the camera and how it connects to the surface cleaner handles? I have been looking for something like that.

Thanks.
 
Thanks for the camera mount pictures where can I get one of those mounts?
 
The camera came with the mount and some other extras. I guess it depends on what camera you have but maybe some of the GoPro or others might work. They have a lot of that stuff at wallmart.
Never have had that concern with flying all over. Just at first pull but have learned to deal with it with different Handel start up positions. Not a big fan of putting extra strain or premature wear on parts.
 
Having the same issue it sounds like. Actually building a little suction. I've had to modify my technique by tilting left to right so it will hoover better. Thought it was from the brush getting low.
Thanks for those handle pics I need to modify mine.
 
You must log in or register to reply here.
Back
Top