Chemical tanks

How are y'all hooking ds injectors to chemical tanks?

Sent from my LG-H811 using Tapatalk
 
Last edited:
Can i run a piece of pvc to the bottom of the tank, screw a barb into the top, then plug my downstream injector into that?

Sent from my LG-H811 using Tapatalk
 
I don't see why that wouldn't work. Unless someone else knows different, I would keep the pvc pipe ID as close to the chemical injectors draw line ID as possible.

How deep is your tank?

Mike
 
I originally had a 1/2 inch bulkhead with a 1/4" barb screwed in the top and bottom and hooked it up that way. It would quit pulling all the time. I just put the hose through the hole. Had to stuff plastic around the edges to keep SH form splashing out of the hole. But it has never stopped drawing. I think if you screwed the pipe into the bottom of the bulkhead and put you injector line through that it would be a better situation.
 
I originally had a 1/2 inch bulkhead with a 1/4" barb screwed in the top and bottom and hooked it up that way. It would quit pulling all the time. I just put the hose through the hole. Had to stuff plastic around the edges to keep SH form splashing out of the hole. But it has never stopped drawing. I think if you screwed the pipe into the bottom of the bulkhead and put you injector line through that it would be a better situation.
Well thats disappointing. Was hoping to have a way to easily flush water through my injector without pulling the hose straight outta the bleach and have it drip all over my trailer.

Sent from my LG-H811 using Tapatalk
 
Well thats disappointing. Was hoping to have a way to easily flush water through my injector without pulling the hose straight outta the bleach and have it drip all over my trailer.

Sent from my LG-H811 using Tapatalk
I haven't rinsed an injector in years. My injectors last 3 months, throw them away. For about $18 shipped, seems reasonable. I would put a 3 way poly ball valve with a line to my water tank, if I were to rinse my injector. I replaced my tailgate and back bumper because of sh dripping. Won't happen again.
 
Back
Top