Blackmon shooter tips

D

Demetrius73

New member

• Nov 6, 2016

• #1

Hello everyone, I'm having a problem drawing soap out of my shooter tips. I'm running a 8 gpm 3600 psi with 150 hose I used to draw soap with no problem now it acting more like a rinse nozzle. I have no problems out of my other soap nozzles


Sent from my iPhone using Tapatalk

 

Guy Blackmon

Roundtable Host 2009

• Nov 7, 2016

• #2

What size down streamer are you using?........I've never received any feedback like this from the 1000's of Contractors that use The "Original Shooter Tip" .....

 

814jeffw

Active member

• Nov 7, 2016

• #3

Yea,..there's something else going on there,..unless you have something stuck in the nozzle,..there's no logical reason for what's basically a fixed "large" orifice to make a negative impact on the draw from an injector.

Jeff

 

D

Demetrius73

New member

• Nov 8, 2016

• #4

The downstreamer came with unit I know it's not your tips I just can't figure out what's going on

 

ProClean

New member

• Nov 8, 2016

• #5

Have you checked your quick connect plug the nozzle is screwed into. You've got some blockage somewhere causing the pressure to be higher if you say it's working with your other low pressure tips.