Hudson Valve

[Richard Ludlam]

Too many overflows! I installed a Hudson valve, works great but i'm getting a sense that my tanks are taking longer to fill. My imagination or do these valves restrict some water flow?

[CL Scott]

I've always used one so I wouldn't know the difference. I do know that since I went to a 1 inch supply hose it seems to allow my tank to fill faster! Even a couple of my guys noticed the same thing!

[CL Scott]

Here's a picture

red hose.jpg

[CL Scott]

A closer shot

red hose.jpg

[dave mac]

I think they do restrict the flow a little, but I use them

[Richard Ludlam]

I've always used one so I wouldn't know the difference. I do know that since I went to a 1 inch supply hose it seems to allow my tank to fill faster! Even a couple of my guys noticed the same thing!

We use 1.5 on the hydrant and 3/4 on supply hose. I might increase up to 1 inch. with an 8 gpm & 5.5 running we can run the tank dry fast.

I like the reel set-up on the back of your trailer. Is that something you fabricated yourself? I could use more room and considering something similar.

[Chris Dubbs]

Chances are you have a good filter before the pump, so I would get rid of the one on the valve. Also we just switched to the Abertax valve and loving it. I have yet come close to running out with 7gpm on 70 gallon tank.


Sent from my iPhone using Tapatalk

[Christopher]

Those valves will flow over 20 gallons per minute. I have always used them and I have never noticed a slowing of the flow except when the filter inside starts to get clogged.
I have 3 of them on my tank and they do a great job.

[mrbill58]

I use an IBC tank for my water supply and use 2 Hudsons on a 3/4 "T". I can run 8 gpm and my tank stays full to the top.

[Ralph Q]

I use two. they do restrict flow. When I need a second feed reel, I unhook one and hook it up. Just feel your hose, it is always solid which means there is back pressure because of the restriction.

[CL Scott]

We use 1.5 on the hydrant and 3/4 on supply hose. I might increase up to 1 inch. with an 8 gpm & 5.5 running we can run the tank dry fast.

I like the reel set-up on the back of your trailer. Is that something you fabricated yourself? I could use more room and considering something similar.

Thanks! Those are 18" cox reels on the stackable kit they make.

Sent from my SM-N920P using Tapatalk

[Richard Ludlam]

Thanks! Those are 18" cox reels on the stackable kit they make.



Sent from my SM-N920P using Tapatalk

Attachment 30556

Not the cox

Back of trailer, removable...welded...bolted ?

I like it. need to do something similar.

[CL Scott]

Oooohhhh! Bolted steel tubing. 2". Thinner than 14ga. Probably 18ga

Sent from my SM-N920P using Tapatalk