Udor Pump Pressure Problem - Need Help

trianglehomedeck

New member
I have a WATER DRAGON LOW PRESSUREAPPLICATOR SYSTEM 10.5 GPM @300PSI, ELECTRIC START HONDA,UDOR ZETA PUMP, 300' AG HOSE Soft Wash setup.

I am only getting about 50psi pressure when I usually get upwards of 200.

Here is the list of things I have done:

- Rebuilt entire pump with all new diaphragms and check valves
- Put all new oil in the pump
- Checked every hose for leaks, I am not seeing any bubbles in the hose nor do the hoses shake abnormally when its running

My Honda runs fine, and everything seems normal, except pressure is not there. I need help figuring out whats going on.

Thanks for your time,

Richard
 
I am certainly not above making a stupid mistake, but I have been running it for 3 years, so like I said everything is normal (not in prime), I just don't have the full pressure.
 
Another thought... make sure nothing is trapped in any of your ball valves if you are using them on the inlet side especially. If trash is keeping it from properly closing it might limit your suction and pressure.
 
Diaphragm Pump Pressure Loss

..there's no mention of a Regulator rebuild..
..Is it Bypassing your pressure ??
Call me if you're still down.
..and please Like my FaceBook pages.
 
Back
Top