Cleaning New Concrete

[greg/sd]

Goldstone

 

[Christopher]

This was actually done by a "professional" company.

Complete w reclaim and everything. Lol.

I wonder if that company has a "Rat" issue? hahahahaha

 

[Craig]

Do not Let the photos Scare you, It can be done with the proper Tools and yes the correct Pressure as well as Chems.

You will have to Determine this, heres the Biggest TIP. Do a small Section first allow to dry, the guy who did the damage didn't even know because sometimes you cannot see until its Dry.

Exactly. Another TIP: Get an adjustable height surface cleaner or plumb a pressure relief valve on your current surface cleaner and run the bleed back under the SC shroud. Surface cleaners should have a variable pressure adjustment on all of them!

With a height adjustable surface cleaner you can lessen the impact of the tip to surface by lifting the whole spraybar higher from the ground. WE do some of the weakest concrete anywhere and as long as you DO A TEST FIRST and make sure you are not causing damage, then you probably won't cause damage. Pretty simple.

 

[Doug Rucker]

Goldstone

No. They'd never hire them.