New pressure washer build

That driveway was 10 minutes

Sent from my SAMSUNG-SM-G920A using Tapatalk
 
Awesome deal Ben! That's some fast cleaning!!!

Mike

Sent from my SM-T377V using Tapatalk
 
Good videos Ben.
 
Sure looks like it took your ball valve wash down up a notch. Nice project. if you have time to do another one next winter you may have an off season job, I'm interested. The cheap engine is the key part obviously.
 
Sure looks like it took your ball valve wash down up a notch. Nice project. if you have time to do another one next winter you may have an off season job, I'm interested. The cheap engine is the key part obviously.

That is the hard part... once you've got that the rest isn't all that bad! It's just building a frame and mounting the pump where you want it and the little wiring stuff, these engines are pretty simple!
 
Hi Ben, I know it's an old thread but I am working on a similar project and wanted to ask, how did you mount the round plate to the flywheel? Were you able to pull the pins out of flywheel? I am talking about 8 pins that are on the flywheel and originally drive reefer compressor. We tried to unscrew one but I don't think it is going to happen... Could you elaborate? Thank you.
That is the hard part... once you've got that the rest isn't all that bad! It's just building a frame and mounting the pump where you want it and the little wiring stuff, these engines are pretty simple!
 
Sorry I didn't see this earlier but what I did was cut a circle out of 1/4 plate and drilled it for the holes, then I drilled 6 more holes and tapped the flywheel for bolts to bolt the plate to the flywheel.
Hope this helps feel free to call or text me 360-762-2986
 
Ben, this is one of the best build threads on the board. Thanks for sharing every step, from the flywheel adapter to the radiator mounts.

For anyone thinking about building their own rig, here's what this thread teaches:

  • Match the pump to the engine. Ben ran the pump a little under what the engine could handle so the engine isn't working hard all day. That's how you get long life.
  • Plan the coupling first. A non standard flywheel means you build an adapter. Get that right and the rest is framing and wiring.
  • Keep it simple. Every extra system is one more thing to break on a job.
  • Know your local rules. As Vince said, some areas have emissions and permit rules on diesel units. Check before you build.
  • Keep your receipts and notes. When something breaks, you'll know exactly what parts you used.

Who else has built their own machine? Post pictures and specs.

Ron Musgraves
 
Back
Top