Grime Busters LLC
New member
Looking for suggestions / feedback from you guys regarding the best method to remove existing parking space painted lines.
The lines are done on sealed concrete, the stripe ares was either sandblasted or etched so the original strip would adhere. There is now probably 4 more coats of paint on top on the original bonded stripe. I a biodegradable solvent, Taginator, Turbo nozzle and plenty of heat. With the solvent and the Taginator it worked well on each individual layer of paint after a 10-15 minute dwell time. But with 5+ coats to remove, looking for a faster, more effective solution.
The etched bonding area will always be left behind, and the GM isn't too concerned with that fact; more concerned that the existing striping be completely gone.
Thanks in advance for your help and suggestions.
The lines are done on sealed concrete, the stripe ares was either sandblasted or etched so the original strip would adhere. There is now probably 4 more coats of paint on top on the original bonded stripe. I a biodegradable solvent, Taginator, Turbo nozzle and plenty of heat. With the solvent and the Taginator it worked well on each individual layer of paint after a 10-15 minute dwell time. But with 5+ coats to remove, looking for a faster, more effective solution.
The etched bonding area will always be left behind, and the GM isn't too concerned with that fact; more concerned that the existing striping be completely gone.
Thanks in advance for your help and suggestions.