Pressure Pro skid plate/19hp Kohler questions.

Roy Sanders

Roy Sanders

New member
I have the KCA065 Pressure Pro belt drive skid plate and 19 horse Kohler. Just a quick look tonight as I started to mock it up and it looks like the plate does not have the Kohler bolt patern. Do they just set these plates up for certain engines? Thinking I may have to lay out some new holes and drill them.

Also it the belt guard will not bolt up to the plate as the shaft sits up too high not allowing the guard to set down where it needs to. I can still bolt it to the rear of the engine. Just not sure about to the pump yet or how I am going to fasten it down to the plate. May have to fab something up there. Should have taken some pics of the differences. My first build so I thought I would ask before I proceed. The only pic I have right now. Not allowing my to upload pic for some reason.
 
Never had an issue loading a pic before. I wonder if there is something going on with the site. It acts like its loading then nothing. Oh well. Back to the plate/engine issue.
 
Called Pressure Pro and my engine is not in their format for drilling the mounting holes on their plates. I will have to go ahead and lay out new holes and drill them and modify the belt guard as well.
 
You must log in or register to reply here.
Back
Top