Silver Eagle 45 HP diesel PW for sale

[Clean County PW]

This is a take off from my "Vertical Burner, 525 gal water tank ,12000lb gvw trailer all for sale separately!!" Thread.

I stripped everything off of this trailer and the water tank and Burner are sold. The trailer is up for sale in a different thread in this section and the Powerwasher I had on this trailer is up for grabs also. Its a Silver Eagle 45 HP Lombardini(Kohler) engine that was replaced with a new(Demo) engine of the same since(Don't ask) my guys and myself wrecked the last engine. This engine was purchased in Oct/08. This engine has at most 500 hours on it and it was used mostly for parking garages and other large flatwork jobs. It has a Udor pump that is massive and is rated at 4500psi @ 11gpm. The Generator you see in the picture does not work and a new one cost about $300. We used a separate Generator for the Burner which is since sold. Where that Gen is sitting you could put another pump in there and run this machine with two pumps rated at 9gpm at 3000+psi each. Paul K. could give better idea's on what a two pump set-up you can have with this engine. My goal was to set-up this Powerwasher with a two pump setup and if it doesn't sell I just may do that. Also with this PW I'll sell the 30gal stainless steel diesel tank with it. This is a monster of a PW and its going to be a great money maker for someone.

Just be aware that the left side of the frame we had to cut because of a space issue at one time. The frame can be closed off by welding a piece of aluminum to it or just bolting the frame as is down on the surface and you dont need to weld the piece back on.

This is a monster of an Engine and I hate to let this one go but I am reconfiguring the Flatbed and all of it is being done with cash so I don't retain any more bills---Like that going to last I'm looking to get About $4500 for this PW and Gas tank.
I put the antifreeze container next to this Powerwasher so you can see how large this engine is. This is not for weekend warriors..this is for the guy who is not afraid to work and have an engine run @ 18+ hr stretches.
Any way if your interested shoot me an email at clncounty@aol.com or call my cell @ 631-804-1777.

 

[Clean County PW]

A couple of more pics of the Powerwasher. I would have cleaned this powerwasher to make it sparkle but it just got to cold out so it could've and should've been much cleaner for these pictures. The last Picture is of it covered up within minutes of the snow storm coming.

 

[innovativewash]

A couple of more pics of the Powerwasher. I would have cleaned this powerwasher to make it sparkle but it just got to cold out so it could've and should've been much cleaner for these pictures. The last Picture is of it covered up within minutes of the snow storm coming.

Hmm!
John,
What are the measurements of the foot print. Just thinking
Wonder if I could put this in our box truck, hook up another 8 gpm pump.

 

[Clean County PW]

I'll have to measure the foot print of the Powerwasher and get back to ya. I'll post it here on this thread tomorrow.

 

[innovativewash]

I'll have to measure the foot print of the Powerwasher and get back to ya. I'll post it here on this thread tomorrow.

Did you measure that or did you sell it already??

 

[Clean County PW]

Did you measure that or did you sell it already??

Did you measure that or did you sell it already??

Hey Jim--I;m just giving my stuff away so it seems. The Burner and water tank went fast. My trailer is pretty much gone and now that leaves me with this monster of a Powerwasher. The foot print is 54" by aprox 42". I hate to give this one up but I do have another frame and with a small Diesel engine in my garage that I also have from Silver Eagle which I am going to build up if I sell this one. Like I said I cut the frame yrs ago so I could throw this Monster PW in the back of my pickup. Then after that I put it on my flatbed. I'll send you a picture of each of those. Before that This Powerwasher use to be in a box truck that I had and my worker crush the top of that truck into a giant tree branch which caused that truck to go.

OF course 2 yrs ago we screw up the engine beyond repair because we didnt set the antifreeze into the flow tank up so when the engine got a little hot it would dump antifreeze out instead of into this holding tank like a car and then syphon back what it needed. My workers just chalked it up as the engine was overheating but it wasnt to bad. End result we got the new exact Lombardini demo engine model 2004 CHD with 1 hr on it so its basically a pretty new engine.

If your interested I can't let this Powerwasher go for under $4000. Thats my bottom price. Remember its just that Beautiful and Powerful Lombardini/Kohler Liquid cooled aprox 45 hp diesel engine with that giant Udor pump rated at 11gpm @ 4500psi. and of course the 30 gal stainless steel gas tank for this diesel washer, That pump alone has to be worth over a $1000. Maybe even twice that. The To buy a specialty engine like this would probably cost at least 6 grand.

anway if your interested Jim give me a holler on here, or my business phone @ 631-544-4971 & if I or Kathy dont get your call right away leave me a message and I'll call u asap.

Thanks---John

 

[Cooper]

SOLD, Thanks John!! This thing is a workout to use! :grin:


I thought 8 gpm was plenty but now those washers feel weak after running this one for a couple days!