commercial work

[DJ Carroll]

Russ do you know what the stock BTU is on the PP ?

 

[Ashley Phillips]

1.1 million btu's

 

[DJ Carroll]

Bunn was wondering so ill let him know

 

[Ashley Phillips]

just kidding it's 675,000 btu's

 

[Russ Spence]

675,000 Scrappy , I told Ash to tell you that ?

 

[Donny Jackson]

What did you up them to?

 

[Russ Spence]

the stock max was 248 degrees , I can get them to 300 now

 

[Donny Jackson]

Man thats hot ....oops that didn't sound right ..lol

 

[IndyExterior]

OK since water boils at sea level at 212. You are at 300 exiting the burner I'm guessing. I know it's dropping from the burner to the surface cleaner but what is actually coming out steam or hot water?

 

[wetfoot]

Russ what do you do to the burners to get them to 300?

 

[wetfoot]

change out the fuel nozzles???

 

[Squirtgun]

change out the fuel nozzles???

And now his skids get less milage than the F350

 

[Russ Spence]

And now his skids get less milage than the F350

It sure does BUT I dont turn them up except on extreme oil and grease areas and yes it does turn to steam and goes thru o rings FAST !

 

[The Cleaner]

well gentlemen, i appreciate your input. thank you

Hot Water period !!

 

[kerriromeo]

hot water

what is the best way to get in to the hot water machines for commericial work? we do all residential work and fairly well at that but need contract work to pull us through the winter months so we will be trying to get into commercial- we are temorarily "borrowing" a landa hot water machine for our first job (my brothers resturaunt)- my husband is already complaining about the problem of getting the machine into and out of his truck......also- the resturaunt has a water supply, but for the places that dont have one that acccessible- what is the most practical way of i guess having our own water supply??????

 

[JohnB]

GUM ( Get a 5 degree gum buster nozzle and use hot water..) Gum removal is easy yall... Come on .... Spray caustic , use your gum buster nozzle .. mine is a 0504 gp... then run the surface cleaner and your done..

 

[810f250]

all of them are 5.5 @ 3500 @ 300 degrees water temps !

Just curious Russ if you could have more flow per skid, would you want/need it (for your flat work) and what would the GPM be?