How do I clean this
- Thread starter mdtino
- Start date
Larry Millette
Member
Doug Rucker will tell you.
john neilson
Roundtable Host 2009
AZ PowerWash Pros
New member
I am not an expert brick cleaner by any means but when I have brick cleanings I turn to EacoChem products.
Here is their restoration line:
http://www.eacochem.com/ProductList/productListRestoration.htm
Here is their restoration line:
http://www.eacochem.com/ProductList/productListRestoration.htm
Larry Millette
Member
OK, basicly what I'm seeing is just an old brick building with mold issues. First thing I would try would be a a strong house wash mix with a good amount of soap. Keep the SH in your tank pretty much straight ( very little to no water ). Down stream all the brick and trim work. You may have to do 2-3 applications and let it dwell on there. Don't rush it. Let the mix do its job before you try to start rinsing. I can just about guarantee you that will work, but, if for some reason it needs more of a kick you may have to use a dedicated pump ( 12 volt or air pump ) to apply to mix at a stronger ratio. Once you see the mold dissapear just follow up with a Lt rinse. Another approach would be to apply the chems with an X Jet which will give you a higher ratio of mix application. Not really sure what your working with as far as equipment but these to me are your best options and how I would approach it. Also, using a shooter tip ( 0030-0040 etc...) will keep you off a ladder and or lift. You can shoot that whole building from the ground with no problem. Hope this helps.
Pat Norman
New member
+1 what Larry said. If the mildew is real heavy might just start 1st with xjet to get strong mix.
Ed Thompson
New member
Its mold.
Lets Here how you would do it
Doug Rucker
Roundtable Host 2009
If it were me I'd call Ron, cause he knows the answer.