socalkol
New member
In the next week or two im going to be going to do some injector draw testing on draw rates of variest different injectors on my 8 GPM machine and sharing the results with the boards I am a part of. I have looked to see if anyone has published this before, maybe they have but I have never seen it. In theory the orifice size should determine the draw so we should see similar results between all 2.1's and 2.3's respectively but we will see if anything else affects the results with these injectors. If anyone else has any other injectors theyd like me to add to the mix let me know.
The current lineup of injectors I will be testing is the following: If you have any other
GP High draw 3-5 GPM 2.1mm
GP High draw 5-8 2.3mm
GP High draw 3-5 GPM 2.1mm (Bobs modified version)
GP High draw 5-8 2.3mm (Bobs modified version)
SSS #3 2.1mm
SSS #4 2.3mm
The current lineup of injectors I will be testing is the following: If you have any other
GP High draw 3-5 GPM 2.1mm
GP High draw 5-8 2.3mm
GP High draw 3-5 GPM 2.1mm (Bobs modified version)
GP High draw 5-8 2.3mm (Bobs modified version)
SSS #3 2.1mm
SSS #4 2.3mm