Winter Is Coming: Gary Smart on Winterizing Your Pressure Washer

Ron Musgraves

Exterior Restoration Specialist
Staff member
Gary Smart over at Patriot Cleaning Systems in the Midland / Odessa, Texas area just put out a short video every pressure washing contractor needs to see before the first hard freeze.

Watch Gary's winterizing video on Facebook

His message is simple: if you're pressure washing, you need to start thinking about winterizing your equipment now. When freezing temperatures show up, water left sitting in your pump, unloader, plumbing and hoses can freeze, expand and crack parts. That turns a free five-minute job into a very expensive repair and a machine that's down when you need it.

In the video Gary is in the shop next to a trailer-mounted skid, showing where you can open things up and drain the water out before it freezes.

My quick winterizing checklist
  • Drain the water from the pump, unloader, plumbing, hoses, guns and wands.
  • Run pump antifreeze (pump saver) through the pump if your machine stays outside or in an unheated trailer.
  • Drain or protect your buffer tank, float tank and any water lines on the rig.
  • Don't forget hot water units: drain the coil or run antifreeze through it.
  • Store hoses and reels where they won't freeze solid.
  • On the first cold morning, check for cracks or leaks before you fire it up.

Even in Texas and here in Arizona we get freezing nights. One cold night is all it takes to crack a pump head.

If you're in West Texas and need parts, service or repair, Gary and Patriot Cleaning Systems are a great call. Here's my earlier write-up on them: Pressure Washer Service and Repair in Texas.

Winterize now. Your wallet will thank you in January.

Ron Musgraves
 
Back
Top