Yep, accumulator solves your problem.I would size your tips to match the pump. If you don't have one, get an accumulator. Pick up a 00 and a 15 in a smaller gpm for when you need to slow your flow down and be more precise.
Sent from my iPhone using Tapatalk
Can you please post a link when you get a chance? I would appreciate it.I would size your tips to match the pump. If you don't have one, get an accumulator. Pick up a 00 and a 15 in a smaller gpm for when you need to slow your flow down and be more precise.
Sent from my iPhone using Tapatalk
Forget it I will go to the power wash storeCan you please post a link when you get a chance? I would appreciate it.
Thanks Mike.Number 10 tips are too small an restrict the flow to much. You need number 30 or 40 tips to stop the pulsating. Call Bob at pressuretek he can explain why this happens better than I can but the tips are the answer even without the accumulator.
Yep the tip is too small without an accumulator. #30 is the smallest I would go if you want it to run (and last) without an accumulator.
Or you could get an accumulator and use any nozzle you want.