Aladdin Pressure washer
- Thread starter Tooth
- Start date
Sirocco Jerry
Active member
I think it's one of the T99 series.. call or text me for more.
plunger diameter will tell us a lot
plunger diameter will tell us a lot
Tooth
New member
These might help with identification of Aaladin pump question. The measurements of the ceramic plungers are 18.00mm diameter x 32.9mm length, the valve cages measure 20mm diameter x 14.25 thick the head is 4 3/16" wide x 3 1/4" tall the bolt pattern on the head is 31.5mm center to center from right to left and 24.0mm center to center top to bottom with a pattern like a number 8 domino piece also here's some pictures I'm looking to rebuild it or replace it depending on $.
Attachments
Russ Johnson
Equipment Expert
That's a Giant pump, probably a P316.
Here's the manual for the P300 series. Let me know what you need, I can get it.
http://www.giantpumps.com/pumpspages/pumpmanuals/P300-16_18mm.pdf
Here's the manual for the P300 series. Let me know what you need, I can get it.
http://www.giantpumps.com/pumpspages/pumpmanuals/P300-16_18mm.pdf
Sirocco Jerry
Active member
if the length of the pump is 7.9"
.. it is a P218..
..rated to 2500 psi intermittently.
and is worth rebuilding IF it passes the "inspection"..
whenever you have the head off of a pump..
Check the piston rods for "in & out play".
e-mail me, if you want the check-list.
.. it is a P218..
..rated to 2500 psi intermittently.
and is worth rebuilding IF it passes the "inspection"..
whenever you have the head off of a pump..
Check the piston rods for "in & out play".
e-mail me, if you want the check-list.
Doug Rucker
Roundtable Host 2009
Tooth, please fill out your signature...thanks. If you need help let me know