correct nozzles for landa surface cleaner

[SUPERIOR CLEANING]

Can someone please let me know what would be the correct nozzle for a landa surface cleaner, one of the nozzles is very worn out and does not leave an even spray pattern, will be replacing both but on the nozzle I took off of the machine there is no number or code I can read to order new ones online.
thanks for your help

 

[Russ Spence]

well it would depend on the machine output that is running the surface cleaner

 

[SUPERIOR CLEANING]

I have a landa 3500

 

[chrishartje]

Post the G.P.M. of your machine. And I'm sure someone will help you out!

 

[SUPERIOR CLEANING]

Post the G.P.M. of your machine. And I'm sure someone will help you out!

5 gpm

 

[Scott Stone]

2.5 or 3 gpm. They will both work.
By the way, if you are a relatively new startup, you might want to do a name search with the secretary of state, because there used to be a large company that used Superior Cleaning in Arizona.

You choice of course, but it could be protection from liability.

 

[Ron Musgraves]

2.5 or 3 gpm. They will both work.
By the way, if you are a relatively new startup, you might want to do a name search with the secretary of state, because there used to be a large company that used Superior Cleaning in Arizona.

You choice of course, but it could be protection from liability.

They might be the company Greg Sold, the guy is now located in Tucson...It operates under that same name.

Will see i guess

 

[SUPERIOR CLEANING]

2.5 or 3 gpm. They will both work.
By the way, if you are a relatively new startup, you might want to do a name search with the secretary of state, because there used to be a large company that used Superior Cleaning in Arizona.

You choice of course, but it could be protection from liability.

thanks for the advice i will definetly look into it, I had done a search before and and did not find anything in AZ, but i just started two months ago so I would not hava a problem changing name in case needed

 

[David O'Connell Jr]

Tito
you need to fill in your signature line

 

[SUPERIOR CLEANING]

2.5 or 3 gpm. They will both work.

.

but what degree would the nozzles be????

and there is any place you guys can reccomend in phoenix or online where i can get the best price on parts and accsessories

Thanks

 

[Ron Musgraves]

but what degree would the nozzles be????

and there is any place you guys can reccomend in phoenix or online where i can get the best price on parts and accsessories

Thanks

http://www.scecorp.com/2008/index.html

 

[SUPERIOR CLEANING]

http://www.scecorp.com/2008/index.html

I have read on previous post that they are kind of expensive and customer service is not that great, unfortunatly they do not show parts list on their website to compare prices, is this where you get your parts Ron?

 

[Grime Busters LLC]

1503, 2503. I assume you can't read the numbers etched into the current tips ?

 

[SUPERIOR CLEANING]

1503, 2503. I assume you can't read the numbers etched into the current tips ?

checked really good for a code on the old one but it does not have one.

thanks

 

[The Cleaner]

You will want to use 2503

 

[Christopher]

If you don't want to deal with the local guys, the vendors here online will be more than happy to help you out.

Look in the distributor section and get their names and call them, it will take a few days to get your stuff but you will more than likely save 50% or more if you are not in a hurry.