Feedback on my set-up

ICanDoThat

ICanDoThat

New member
Chemical bandit-Roof/Housewash for application and rinse off.

4000 series 100 foot hose reel

100 foot by 3/8 inch 4000PSI blue non marking spiraflow PW hose

Whisper wash Maxima 36 inch surface cleaner

So far that is what I have drafted.

How about where to buy good tanks 100 gallon?

Brushes for gutter cleaning?

Anything else I left out?

This is ofcoarse from Bobs Store.

Thanks
 
i can get you a 275 gallon tote with a wire cage here tally for 125.00 but you have to come pick it up from guy who sells them there going fast
 
Have you used the chemical bandit yet is it a step above the delavan?
 
You may find 100' of hose is not enough. Keep another 100' as a spare if it isn't on your reel.
 
chrisduffy543 said:
Have you used the chemical bandit yet is it a step above the delavan?
Click to expand...

I just ordered my Chemical bandit today, and spoke with Bob about it. He said it does 6GPM, and with the right orifices has shot chems over 90 ft! He said they do 60 feet with the tips it comes with. Seems to me like its about 10 steps over the delevan. Ill let you know in a couples weeks when I get it.
 
Yes please tell me i may have to get one.
 
your not running your surface cleaner off of your chemical bandit right?
 
chrisduffy543 said:
your not running your surface cleaner off of your chemical bandit right?
Click to expand...


Correct. I am looking to add a Honda that does about 5.5GPM for that. I was at first wandering if I could get away with it before I broke down and asked someone. I also thought I had to have a full PW instead of just getting th Honda engine. Imagine me buying and bolting down a full PW set up?

Jimmy
 
Get a extention pole for gutters. You can get them at Lowe's, along
with the brush. Get the one with the pin, not the one with the screw
type for tightening or loosening. Order some F-13 also from Bob.
36" will move super slow with a 5.5, you might want a 24".
200' of high psi hose at the minimum.
 
ICanDoThat said:
Correct. I am looking to add a Honda that does about 5.5GPM for that. I was at first wandering if I could get away with it before I broke down and asked someone. I also thought I had to have a full PW instead of just getting th Honda engine. Imagine me buying and bolting down a full PW set up?

Jimmy
Click to expand...

Yes, 5.5gpm will be painfully slow. You need at least an 8gpm.

Personally I run an 8gpm+5gpm =13gpm with a high pressure "T" joining both machines together into my 36" maxima
 
ok so a higher gpm is recommended what psi should be standard for like a drive way cleaning (residential)?
 
Yes, I forgot to mention I spoke with Ken and he suggested just like most did by saying to back down to a 24 for surface cleaning with the 5.5 Honda. The bandit does come with 200 feet, but should I also buy 200 for the surface cleaner or is the 100 I quoted before work for what I need. Actually you are right. All houses are different as well as size, so 200 it is.

Now the thing is how to set it up the best way?
 
You must log in or register to reply here.
Back
Top