General Pump

[E-P-W]

Russ,

I won a general pump(model T9051) at the Round Table held at Steamaway this past weekend. I am trying to find the best way to use it.

What would you do with it?

Can it be used as a low pressure roof washing pump.

Thanks

 

[El Flojo]

I would use it to pressure wash. :sarcastic:

 

[El Flojo]

what size of pump?

 

[Scott Stone]

2.1 GPM 1500 PSI direct drive pump. Not a lot of volume, and not a lot of pressure.

 

[Russ Johnson]

Russ,

I won a general pump(model T9051) at the Round Table held at Steamaway this past weekend. I am trying to find the best way to use it.

What would you do with it?

Can it be used as a low pressure roof washing pump.

Thanks

The T9051 is rated 2.1 gpm @ 1,500 psi and requires a 2 hp, 1,750 rpm, "C" faced electric motor to run it. It isn't of much use for mobile cleaning. Might be something to set up at home for washing the car, rinsing patio furniture, etc. You could get a generator (8,000 watts or larger) to run it mobile, but I wouldn't run bleach through it.

http://www.generalpump.com/pdfs/TT2021EBF-Pump.pdf

 

[TheCleaningDoc]

Water gun fights in the back yard with the kids.

 

[The Cleaner]

Water gun fights in the back yard with the kids.

:sarcastic:

 

[E-P-W]

Thanks for the info guys.

Pump is not much use for the mobile power washer then is it

 

[E-P-W]

Will it bolt up to a small engine

 

[Russ Johnson]

Nope, it's a 5/8" shaft with a "C" face flange for a 56C series motor. I'll give you a $200 store credit for it if you'd like. I can use that pump on an electric machine.

 

[Scott Stone]

You could use that pump for a misting system for your back yard.

 

[welder]

Nope, it's a 5/8" shaft with a "C" face flange for a 56C series motor. I'll give you a $200 store credit for it if you'd like. I can use that pump on an electric machine.

What is the difference between that and a 9051?? Same mounting just less pressure?

 

[Russ Johnson]

That's the 9051 that I'm talking about. I don't exactly understand what you're asking. If you follow the link I posted above, you'll see specs for several different pumps. The 9051 is on the left.

 

[E-P-W]

Russ

Thank you for the great info.

Will you trade on another pump that would by more useful for me?

 

[Russ Johnson]

I've got an AR - RKV4G35 on the shelf priced at $375.00. I'll take your pump and $150.00 and you take care of the freight on both.

 

[Alexy]

Can it be used to preplace a TT9111 ??? if so I would like to make a deal with you.

 

[Russ Johnson]

TT9111 is rated 3 gpm @ 1,750 rpm. T9051 is rated 2.1 gpm @ 1,750. It can replace it, but with different operating parameters.

 

[welder]

That's the 9051 that I'm talking about. I don't exactly understand what you're asking. If you follow the link I posted above, you'll see specs for several different pumps. The 9051 is on the left.

Duhhhhhhhh I meant a 9091

 

[Russ Johnson]

Mark, I couldn't find a 9091. There's a TT901 and a T991. The TT901 is rated 2.11 @ 1,500 @ 2,800 rpm and has a solid shaft. The T991 is 3.5 @ 1,500 @ 1,450 rpm, and is also a solid shaft.

 

[welder]

Mark, I couldn't find a 9091. There's a TT901 and a T991. The TT901 is rated 2.11 @ 1,500 @ 2,800 rpm and has a solid shaft. The T991 is 3.5 @ 1,500 @ 1,450 rpm, and is also a solid shaft.

I needed my glasses ,, getting old does suck. tt 9061, and can it be rebuilt? crank and all internals? Or rather, are parts available?